Blue Strand Steel Wire Rope

Blue Strand Steel Wire Rope

Blue Strand Wire Rope

adalah merk wire rope ternama dari Inggris yang dimulai sejak tahun 1924 dengan nama British Rope Limited.  Sebagai pabrik awal yang memproduksi kawat seling, Blue Strand adalah pionir dalam bidang pengembangan high tensile blue strand wire rope untuk demanding application.

Dan  Blue Strand Wire Rope sendiri adalah kawat seling yang ujungnya diterminasi sehingga membentuk mata. Dari mata blue strand steel wire rope inilah yang digunakan orang-orang sebagai alat bantu angkat.

produk kami banyak digunakan para pemilik kapal & industri pelayaran untuk menarik kapal dan tongkang, di industri oil dan gas (minyak dan gas) digunakan untuk mengangkat barang, pipa dan lain-lain.

Selain itu produk yang kami jual juga banyak digunakan di industri shipbuilding ( docking) , alat berat, crane, bongkar muat, fishing, pelabuhan ( port) , kayu ( logging) , tambang ( mining) , elevator, konstruksi, gondola, steel fabricator dan lain lain.

PT. Cakra Satria Pratama adalah distributor resmi yang menjual blue strand wire rope yang memiliki alat terminasi, sehingga kami menjual kawat seling dan juga menerima pembuatan kawat seling untuk membantu memenuhi kebutuhan para customer kami.

Kami menjual kawat seling dari berbagai negara diantaranya Inggris, Amerika, Jerman, Jepang dan juga China. Kami menjual berbagai macam merk bertujuan untuk memenuhi kebutuhan anda agar dapat sesuai dengan aplikasi yang anda butuhkan dan juga budget anda.

Proyek PT. Cakra satria pratama yang menggunakan blue strand steel wire rope:

  1. kawat seling di Taman Impian Jaya Ancol
  2. kawat seling gondola di Taman Mini Indonesia Indah
  3. kawat seling gondola di Taman Safari

Untuk harga kawat seling dan informasi lain, silahkan menghubungi kami di (021) 73888745 dan email

PT. CAKRA SATRIA PRATAMA
Perkantoran Multi Guna No.8R
Jl. Bintaro Utama Sektor 3A
Bintaro, Tangerang Selatan 15225
Indonesia

Tlp. (62-21) 73888745
Fax. (62-21) 73889031
Email. info@cakrasp-international.com
www.cakrasp-international.com

General Guidance on Rope Selection

General Guidance on Rope Selection

General Guidance on Rope Selection when selecting a steel wire rope to suit a particular application the following characteristics should be taken into consideration.

  • Strength
  • Rotation resistance
  • Fatigue resistance
  • Resistance to wear and abrasion
  • Resistance to corrosion
  • Rope extension

Strength

The responsibility for detemining the minimum strength of a rope for use in a given system rests with the manufacturer of the machine, appliance, or lifting equipment.

 

Dillon Measurement Equipment

Dillon Measurement Equipment

EDXtreme

Dillon Measurement Equipment, our high-end crane scale is built with premium materials and has cutting edge features. the optional radio remote provides convenience and help to ensure user safety

  1. hardware choices:
    select the shackle and hook that best fits your apllication
  2. accuracy and repeatability
  3. optional radio interface:
    safely monitor the scale from a distance
  4. easy to use: SOFTKEY
    interface eliminates confusing menus
  5. Eliminate data entry
    send data to a pc or printer
Sheave Gauge

Sheave Gauge

A properly machined sheave gauge groove allows a wire rope to pass through unhindered by friction or obstructions. Sheaves should be checked periodically for wear in the grooves which may cause abrasion, pinching, and bird-caging of the rope. If the groove shows signs of rope imprints the must be replaced or re-machined and re-hardened.

The correct size sheave is required to minimize wear and tear on the rope or wire. When grooves become overly worn or are too large, they may allow excessive movement, which stresses the rope and reduces its longevity. Likewise, too small of a groove compresses the rope and reduces its useful life because the rope will roll into the sheave groove introducing torque and twist which may cause high stranding and bird-cages.

A sheave gauge is an extremely useful tool for use sheave maintenance by:

  1. Measuring sheave contour wear at the root
  2. Measuring the amount of wear at the groove wall
  3. Measuring the diameter of the wire rope

Sheave Groove

Wire rope will wear the bottom of the sheave groove to a radius smaller than the radius of the sheave. To determine the amount of wear, place the proper size gauge in the sheave and shine a light behind the gauge. Light should not be detected between the gauge and the root of the groove. If wear is evident, the sheave should be re-machined or replaced .

Wire Rope Safety Barrier Installation

Wire Rope Safety Barrier Installation

The Brifen Wire Rope Safety Barrier (WRSB) is a high tension cable barrier and is distinctive due to its interwoven rope construction. Brifen’s patented interweaving of the wire ropes are used to contain and redirect errant vehicles by preventing the vehicles from crossing the barrier or deflecting back into the traffic flow. It is designed to absorb the energy of an impact, minimising injury to passengers and damage to vehicles. Due to the weaves interaction with the post, Brifen can achieve tighter rdius than other products at the same post spacing. A versatile system, it can also be installed for retrofit applications on a slope of up to 1V:4H.
Brifen Wire Rope Safety Barrier has been tested to the guidelines in NCHRP 350 TL-3 And TL-4 for longitudinal cable barriers. The system is in service in over 40 countries with over 5000km installed worldwide. In Indonesia, more than 70km of this system is in service with some of the earlier installations in continuous service for well over 8 years.

Brifen wire rope safety fence

Brifen wire rope safety fence

The Brifen Wire Rope Safety Barrier (WRSB) is a high tension cable barrier and is distinctive due to its interwoven rope construction. Brifen’s patented interweaving of the wire ropes are used to contain and redirect errant vehicles by preventing the vehicles from crossing the barrier or deflecting back into the traffic flow. It is designed to absorb the energy of an impact, minimising injury to passengers and damage to vehicles. Due to the weaves interaction with the post, Brifen can achieve tighter rdius than other products at the same post spacing. A versatile system, it can also be installed for retrofit applications on a slope of up to 1V:4H.
Brifen Wire Rope Safety Barrier has been tested to the guidelines in NCHRP 350 TL-3 And TL-4 for longitudinal cable barriers. The system is in service in over 40 countries with over 5000km installed worldwide. In Indonesia, more than 70km of this system is in service with some of the earlier installations in continuous service for well over 8 years.